Automatic Toilet Flush with Adjustable Sensor
Compatible With Push Button Cisterns
Designed specifically for home toilets operating with Push Button Cisterns.
This simple device converts the toilet into an automatic flush toilet system with both half and full flushes. This is the latest toilet automatic flush unit available, compared to other touch free toilet systems this model is more affordable, has higher durability and no special tools or skills are required for installation. This unit is perfect for domestic use as well as for industrial sites, hostels or hotels, factories, schools, shopping centre's, aged care and airports.
Features:
Adjustable dual flush volumes (half/full flush)
Touchless hygiene, minimises risk of cross-contamination
Adjustable Sensor range accommodates DDA toilets at 1100mm
Side mounted USB-C charging port
Easy to install and does not require special tools
Compatible for use with most push button toilets and does not require any renovation work to existing toilets
Flush System:
The infrared sensor is programmed to measure time spent in the detection range ("time-at-toilet") and activate the flush motor inside the cistern, performing either a "half" or "full" flush when the user leaves the detection range
This unit replaces the existing push button, allowing manual press to be used if needed
Specifications:
Compatible toilet: central push button cistern (oval or round in appearance) with diameter to suit a hole min 33mm and max 55mm.
Flush System: Auto-induction, 2-stage flush (low water volume/high water volume)
No Flush: 0.0 - 14.0 seconds
Half flush time: 15.0 - 90.0 seconds
Full flush time: > 90.0 seconds
Maximum flush cycle: 10 seconds
Sensor distance: 110cm (+/- 10cm)
Power: 6 x AA Alkaline, Lithium or Rechargeable Lithium batteries (batteries are not included)
Dimensions: 115 x 70 x 65mm, 360g
Downloads:
2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.
Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase
Warranty Claims Process:
- Notification: If you believe your product has a defect, please contact our customer service department at 07 3283 4536 or notify us in writing to info@mefe.com.au
- Proof of Purchase: Provide proof of purchase, invoice number or copy of tax invoice required.
- Inspection: If necessary, we may request you to return the defective product for inspection to determine the nature and cause of the defect. The cost to return the product may be at your expense.
Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.
Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.
Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.
Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
