Thermal Heating Oil for Dehairing Machines - 20L
Note this is NOT Food Grade -
Oil should be used in sealed closed Systems - always detecting for leaks
when working and filling ensure no contact with foodstuffs.
This oil is a high performance product. This heat transfer oil is formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. Capable of an extremely long service life without deposit formation or viscosity increase. It also has good low temperature fluidity enabling an easy start of cold systems.
This oil should not be mixed with other oil.
Dimensions:
34.5 x 34.5 x 40cm, 20kg
Oil is recommended for use in indirect heating and cooling installations in all kinds of industrial processes operating at bulk oil temperatures up to 315°C. The limitation of the upper temperature is based on the high temperature properties at atmospheric pressure. If used above this level vapour lock may result unless the system is designed to operate at the higher temperature by pressurising with an inert gas, such as nitrogen. At higher temperatures fluid life will be shortened because the rate of thermal degradation increases markedly as temperatures rise above the recommended limit. In well designed systems the temperature of the oil film surrounding the heating element will be about 15°C to 30°C above the bulk oil temperature. To ensure long service life and freedom from deposition of sludge and coke-like material, which interferes with heat transfer rates, the temperature of the oil film adjacent to the heater element should preferably not exceed 345°C. Properties The high thermal stability will reduce the tendency towards viscosity increase in correctly designed indirect heating systems and prevent formation of deposits which interfere with efficient heat transfer operations. The viscosity has been selected to provide quick circulation at start-up and the Pour Point gives good handling properties at low temperatures. The density of the product gives good thermal properties, specific heat and thermal conductivity. These features all help to reduce circulating pump power input and enable systems to be built with smaller bore piping, thus contributing to lower initial installation costs and increased operating efficiency
2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.
Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase
Warranty Claims Process:
- Notification: If you believe your product has a defect, please contact our customer service department at 07 3283 4536 or notify us in writing to info@mefe.com.au
- Proof of Purchase: Provide proof of purchase, invoice number or copy of tax invoice required.
- Inspection: If necessary, we may request you to return the defective product for inspection to determine the nature and cause of the defect. The cost to return the product may be at your expense.
Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.
Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.
Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.
Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
