2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.
Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase
Warranty Claims Process:
Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.
Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.
Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.
Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The stainless steel knife steriliser provides hygienic hot water knife sterilisation for up to 30 knives in abattoirs, meat processing plants and other food production environments. Manufactured from 304 stainless steel with IP66 protection, the unit is designed for demanding hygiene areas.
Three 1 kW heating elements, thermostatic temperature control and a continuous water flushing system support consistent operation. Double walled insulated construction, integrated safety protection and a removable knife holder provide a practical solution for high capacity knife sterilisation.

304 stainless steel construction for durability and hygienic operation
High capacity design accommodates up to 30 knives
IP66 protection for demanding food processing environments
Three 1 kW electric heating elements with thermostatic temperature control
Preset thermostat with workshop adjustability
Integrated run dry protection and overheating safety trip
Double walled construction with integrated insulation
Continuous water flushing and overflow system
Automatic overflow and drain system with ball valve
Fresh water inlet with stainless steel non return valve
Gooseneck air gap arrangement for backflow protection
Removable stainless steel knife holder for cleaning and maintenance
Wall mounted construction with two rear mounting brackets
Capacity: 30 knives
Maximum blade length: Approximately 300 mm
Material: 304 stainless steel
IP Rating: IP66
Heating: 3 x 1 kW elements
Temperature Control: Preset thermostat with workshop adjustability
Power Supply: Three Phase: 400V, 50Hz
Power Input: Approximately 8 A
Water Inlet: Fresh water inlet via non return valve with gooseneck air gap arrangement
Overflow Connection: R 1/4" external thread
Drain Connection: R 3/8" internal thread with ball valve
External Dimensions: 400/450 (W) x 200/230 (D) x 410/525 mm (H)
Internal Basin Dimensions: 350 x 150 x 265/310 mm
Weight: 14 kg
Mounting: Wall mounted
Angular Screw Connection Elbow 10 mm (CAT 66 102)
Shut Off Needle Valve (CAT 66 101)
Thermostat with Sensor (CAT 64 10N2)
Temperature Limit Controller (CAT 64 10NC)
3 x Replacement Heating Element 1 kW