Stainless Steel Wall Mounted Knife Steriliser
Heavy Duty High Pressure Spray Protected IP66.
Made from high quality Stainless Steel, Designed for high risk hygiene areas, perfect for use in Abattoirs.
Dual Water input - Airgap from top and Non return
Features:
Electrically heated factory pre-set thermostatically Controlled for effective sterilisation – Workshop adjustable
Double walled integrated insulation
Dial Thermostat
Easy to install – comes with bracket for wall mounting
Supplied fitted with electrical overload run dry protection
240V - 1kW element IP66, Fully automatic with overload trip & reset button
Holds 6-8 knives up to 12" long
Fresh water input from below fitted with Ball valve and Stainless steel Non Return Valve as well as fresh water is fed in via a 10 mm tube that is welded at the outside of the basin This allows for air Gap fed fresh water into the sterilizer to be drawn down to the element via a standpipe fitted internally, in combination with an inlet tube there is a ¼” ball valve fresh water inlet from below fitted with Stainless steel Non return thus allowing fresh water supply from bottom, Eithor or Both inlets for fresh water can be used with best practice being flushing water input via the gooseneck tube and controlled to a minimum via the needle valve allows for constant flushing and Input from the bottom used when filling sterilizer.
Auto Overflow and level protection - skims fat constantly from surface
Dimensions:
290 x 260 x 525 mm
Boxed 8.65 kg
Spare Parts:
Download Operation Manual Here
2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.
Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase
Warranty Claims Process:
- Notification: If you believe your product has a defect, please contact our customer service department at 07 3283 4536 or notify us in writing to info@mefe.com.au
- Proof of Purchase: Provide proof of purchase, invoice number or copy of tax invoice required.
- Inspection: If necessary, we may request you to return the defective product for inspection to determine the nature and cause of the defect. The cost to return the product may be at your expense.
Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.
Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.
Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.
Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
- Knife Capacity:
- 8
- Maximum Blade Length:
- 12"
- Fresh Water Inlet:
- Inlet on Bottom
- Overall Size:
- 290 x 260 x 525 mm