null

Stropping Paste/Honing Compound


Rf 157.65
Rf 109.14
Inc. GST
Rf 143.32
Rf 99.22
Ex. GST
You save Rf 48.51
(No reviews yet) Write a Review
SKU:
CAT 139 8
Availability:
Same Day Dispatch (order before 12:00pm AEST)
Shipping:
Calculated at Checkout

Options

Rf 157.65
Rf 109.14
Inc. GST
Rf 143.32
Rf 99.22
Ex. GST
You save Rf 48.51

Info

SKU:CAT 139 8 ,Availability: ,Shipping:

Info

SKU:
CAT 139 8
Availability:
Same Day Dispatch (order before 12:00pm AEST)
Shipping:
Calculated at Checkout

Warranty

2 year Manufacturer's Warranty:Below are the terms of Manufacturer’s warra…

Warranty

2 year Manufacturer's Warranty:
Below are the terms of Manufacturer’s warranty offered by Mitchell Engineering Food Equipment Pty Ltd. 23 Storie Street Clontarf.

Warranty Coverage:
We guarantee that our products are free from defects in materials and workmanship under normal use for a period of 2 years from the date of your purchase

Warranty Claims Process:

  1. Notification: If you believe your product has a defect, please contact our customer service department at 07 3283 4536 or notify us in writing to info@mefe.com.au
  2. Proof of Purchase: Provide proof of purchase, invoice number or copy of tax invoice required.
  3. Inspection: If necessary, we may request you to return the defective product for inspection to determine the nature and cause of the defect. The cost to return the product may be at your expense.

Warranty Exclusions:
This warranty does not cover defects or damage arising from misuse, modification, neglect, normal wear and tear, or force majeure events beyond our control or failure to adhere to general maintenance as specified within the product manual.
This warranty does not apply to consumables such as batteries, ink, filters and globes.

Remedies:
If a defect covered by this warranty is properly notified to us within the warranty period, and is determined to be covered, we will, at our discretion, repair or replace the defective product.
Any defective parts/products replaced by us under this warranty will be deemed to be the property of MEFE.

Limitation of Liability:
Our liability is limited to the repair or replacement of the defective product and excludes consequential or incidental damages to the extent permitted by law.

Consumer Rights:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Description

Stropping Paste for Honing Wheels and Strop - Tube 45g

Stropping Paste is designed to improve sharpening performance on leather honing wheels, delivering a finer edge and consistent results. It is suitable for use with systems such as the CAT 139 8102 and similar sharpening setups.

Applied correctly with light oil, the compound penetrates the leather surface to enhance polishing efficiency and extend sharpening effectiveness across multiple tools.

cat-139-8.png

This stropping paste/ honing compound may be used to aid sharpening on the CAT 139 8102
To be used evenly over leather honing wheel

cat-139-8a.jpg 

How to use:

  1. Evenly apply a light machine oil to the leather wheel. Use enough oil to provide a thorough coating, but not so much as to saturate the leather and resulting in dripping. This will soften the leather and enable the honing compound to penetrate the leather
  2. Apply a thin coat of abrasive honing paste to the leather wheel using a wooden spreader or similar device. Distribute the paste evenly by hand turning the wheel while spreading.
  3. Turn the machine on and continue to distribute the paste, still using the wooden spreader
  4. Move the spreader lightly in a circular motion across the wheel
  5. Once the paste is evenly distributed, begin sharpening
  6. These preparations will be sufficient for sharpening five to ten tools.  If you notice a drop in sharpening performance or have sharpened more than ten tools, repeat above steps
  7. Do not let the compound dry—apply a few drops of oil if necessary
  8. Always hone or sharpen away from the edge and the wheel spinning away from hand piece